U5 12-24V 250Kg(550LBS) Push Brushless Underwater Thruster Propeller Propulsion 800W For Kayaks ROV Paddle Boats

Parameters:

Motor: 3550;
KV:350;
Maximum thrust: 125Kg(One Thruster push),Two thrust (1set):250Kg
Power: 800W;
Voltage: 12-24V（When the battery is fully charged, the ESC supports up to 29.2V）
Material: Nylon shell;
Weight: 290g;
Length of one thruster line: 1.5 m；
Plug: 4.0mm
ESC:100A/XT60/4.0

Note:

only suitable for fresh water use,use in seawater is not supported,seawater use will rapidly shorten the life of the thruster.
When use the thruster, the thruster wires should not be too loose, as too much looseness can cause the wires to be sucked into the thruster, which can lead to damage to the thruster.

The ESC is specially developed for underwater thrusters and has the following features:

1. The proprietary firmware of ApisQueen thrusters is specially designed to improve the superior performance of the thrusters. The motor PWM generated by the hardware can improve the smooth throttle response and reduce the noise.
2. ApisQueen's exclusive firmware will generate regenerative braking, making it more efficient. When the throttle changes from large to small, the thruster decelerates and responds more quickly, and the stability and flexibility of the thruster are significantly enhanced.
3. The ESC automatically detects the throttle signal when it is powered on, and supports 1-2ms pulse width input, Oneshot and Multishot in normal PWM throttle mode.
4. Support Dshot150, Dshot300 and Dshot600. Dshot is a digital signal with strong anti-interference ability, and the ESC does not need to calibrate the throttle stroke.
5. The signal wire is a twisted pair of silicone wires, which increases its service life and effectively reduces the interference caused by the signal transmission in the copper wire, making the thruster more stable.